Light Best For: flowering and fruiting plants during growth and flower stage. Light Mounting Height: 12-20in above canopy. Light PPFD (mol/ m²/s) (stage: h=mounting height A=canopy coverage). 420 mol/m²/s (Vegetative: h=20in A=3X3ft).
600 mol /m²/s (Flower: h=16in A=2X2ft). Light Operating Temperature: -20 t0 40.LED chip soldering pad temperature: 70 (at room temperature 28). Power Driver: aluminum housing and Thermal sealant.
Light Net Weight: 1.6kg , 3.50lbs. Light Dimension(inch): 14.2(L)x12(W)X4(H).CMH²PS FULL SPECTRUM: We use 3500k white light as seedling and VEG spectrum (B:GY:R:FR=15%:45%:35%:2%), this spectrum is same as CMH/CDM on RGYB rate. When Flower Booster Switch ON, this spectrum(B:GY:R:FR=12%:30%:48%:8%) get more red and far-red light , this spectrum is same as HPS on RGYB rate. Professional growers know that CMHCDM is great at the seedling and VEG stage, and HPS is able to ensure a very good harvest. High PPF efficiency Design: Our light get 2.4µmol/J PPF efficacy even it get 50% R, and CMHCDM is 1.6 µmol/J, DE HPS is only 1.8µmol/J. It consume only 120W with 360 LEDs , and we use only 1% light decay nano-waterproof coating. All of these will save power more than 40% compare to old LED grow light. Uninterrupted Actual Planting Test: We set up some grow tents in our factory , we test our lights with pepper planting from germination to fruit. Using CMH and DE HPS to grow together , constantly adjust spectrum and efficacy with our led light , try to design best led grow light. FOOTPRINT : In veg stage , 4X4ft just need 3pcs this lights , hanging 20in from the plant. In Flower stage, 4X4ft need 4-6pcs this lights , hanging 20in from the plant, and the harvest will very cost to 1000W HPS. It must be noted that if you want to get a good harvest, try to keep your grow room at a temperature between 68°F and 86°F , especially in winter, because the heat of LED light is low. MOST SAFE LIGHTS: Power drive is the core guarantee for long-term reliable operation of LED plant growth lamps. With many years of experience in LED power supply development, we know that the control device is in a low temperature and moisture proof state. It is a guarantee for stable and long life of the LED power supply, and it is also a guarantee to avoid fire when the power supply fails. Aluminum shell filling thermal adhesive is our standard for plant lamp power supply, which can meet the requirements of high humidity, high safety requirements and long working time. We will provide you with completely satisfing reply. The item "Fully Dimmable 2000W LED Grow Light Full Spectrum Seeding Veg Bloom Dual Switch" is in sale since Wednesday, August 26, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "whiterose_light" and is located in Rowland Heights, California.
This item can be shipped to United States.