Max Yield: 2.5 Lbs/two lights. Power Consumption: 360W (3.1A110VAC/1.5A240VAC). LEDs: 864 pcs (540pcs 3500K white LEDs, 300pcs Wideband Full RED LEDs, 24pcs UV LEDs). Total chip area: 1.33 square in.
Light VEG B:GY:R:FR : 17%:43%:36%:2%. Light Flower B:GY:R:FR : 12%:30%:48%:10%. Light Best For: flowering and fruiting plants during growth and flower stage.
Light Mounting Height: 12-20in above canopy. /s (stage: h=mounting height A=canopy coverage). LED chip soldering pad temperature: 70. Power Driver: aluminum housing and Thermal sealant.35.4(L)x14.2(W)X4(H). PS FULL SPECTRUM: We use 3500k white light as seedling and VEG spectrum (B:GY:R:FR=15%:45%:35%:2%), this spectrum is same as CMH/CDM on RGYB rate.
Flower Booster Switch ON, this spectrum(B:GY:R:FR=12%:30%:48%:8%) get more red and far-red light , this spectrum is same as HPS on RGYB rate. Professional growers know that CMHCDM is great at the seedling. Stage, and HPS is able to ensure a very good harvest. Our light get 2.7. Mol/J PPF efficacy even it.
And CMHCDM is 1.6. Mol/J, DE HPS is only 1.8. We use SANAN 2235 dual chip , it.
S chip area is almost twice the size of. LM301B, and consume only 360W with 864 LEDs , and we use only 1% light decay nano-waterproof coating. All of these will let grower get 40% higher yield compare to old LED grow light. We set up some grow tents in our factory , we test our lights with p. Using CMH and DE HPS to grow together , constantly adjust spectrum and efficacy with our led light , try to design best led grow light.FOOTPRINT : In veg stage , 4X4ft just need 1pcs this lights , h. In Flower stage, 4X4ft need 2-3pcs this lights , hanging 20in from the plant, and the harvest will very cost to best 1000W HPS. It must be noted that if you want to get a good harvest, try to keep your. Specially in winter, because the heat of LED light is low. Power drive is the core guarantee for long-term reliable operation of LED plant growth lamps.
With many years of experience in LED power supply development, we know that the control device is in a low temperature and moisture proof state. It is a guarantee for stable and long life of the LED power supply, and it is also a guarantee to avoid fire when the power supply fails. Aluminum shell filling thermal adhesive is our standard for plant lamp power supply, which can meet the requirements of high humidity, high safety requirements and long working time. We will provide you with completely satisfing reply. The item "WhiteRose Full Spectrum 6000W LED Grow Light Hydroponics Lamp For Indoor Plant" is in sale since Tuesday, May 14, 2019.
This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "whiterose_manufacturer" and is located in Chino, California. This item can be shipped to United States.